Phil's Vintage Movie Films and Collectibles


Presstapes1a.jpg (23973 bytes)

MOVIE FILM SUPPLIES & EQUIPMENT

Updated May 13, 2008

HPIDeluxSplicer2.jpg (25231 bytes)

This is a very long page. Scroll down down_arrow.gif (1147 bytes) or click the links below to go directly to what you need. If quantity is limited on any item, the quantity available will be shown in brackets ( ). Prices shown are for one item unless noted.

PROJECTOR BELTS, PARTS, PROJECTOR LENSES

8MM,   SUPER-8, 16MM & 35MM  MOVIE REELS

8MM,   SUPER-8, 16MM & 35MM MOVIE FILM LEADER

SPLICERS,  SPLICING TAPE,  VIEWERS, HAND REWINDS

FILM CLEANING CLOTH


BELTS, MISC. PARTS, PROJECTOR LENSES

 

  • SCOPE LENS BRACKET FOR KODAK PAGEANT - For mounting any scope lens with a 1&5/8" collar on any Kodak Pageant 16mm projector. Click the image at the right to see the bracket with a lens on the projector. Excellent with tightening wrench - $149
  • UMIG DAYLIGHT VIEWER FOR 800 SERIES SUPER-8 SOUND PROJECTORS (2)- 2" x 2.5" viewer attachment for 800 series Eumig Super-8 sound projectors. Mint in the OB - $39
ScopeBracketPageantWeb.jpg (70317 bytes)

BHZoomLens1.jpg (39147 bytes)

  • BELL & HOWELL F1.6 ZOOM LENS - For all Bell & Howell 100, 200 and 300 series 16mm sound and silent projectors. Like New with instructions - $199
  • BELL & HOWELL 1.5" (38mm) F1.9 LENS - For all Bell & Howell 100, 200 and 300 series 16mm sound and silent projectors. Excellent used condition in the OB - $59
  • BELL & HOWELL 2" F1.6 LENS - Later style large barrel lens for all Bell & Howell models from 535 to the 3000 series 16mm sound projectors. Like New condition - $59
  • KODAK EKTANAR 2 INCH F1.6 16MM LENS (2) - Can be used on all Kodak Pageant 16mm sound projectors and Kodak Analyst and Analyst II 16mm silent movie projectors. Like New - $69
Kodak1.6Lens1a.jpg (25281 bytes)
BifocalConverter1.jpg (33229 bytes)
  • CINE-KODAK BIFOCAL LENS CONVERTER - For all Kodak Pageant and Analyst 16mm projectors. Attach to the front of the 2" lens to adjust the focal length to 2.5" or 1&5/8". With small instruction sheet. Mint in the box - $149
    Also in Like New to Mint, no box (2) - $99

ORIGINAL MANUFACTURERS MOVIE PROJECTOR BELTS

Any belts I have are mint, unused old factory stock unless noted. I only have a limited number of belts and I only have what is listed. If your projector used a regular rubber belt, you can improvise by using ball bearing O-rings. They come in round or square sided. It's just a matter of trying different diameters until you find the right one.

  • BELL & HOWELL DRIVE BELT (3) - For later model 16mm sound projectors (smaller belt)- $10
  • BELL & HOWELL GREEN FABRIC TAKE-UP BELT (2) - For later model 16mm sound projectors, 2" green fabric take-up spindle belt- $15
  • GRAFLEX 16MM PROJECTOR BELT #39211-P1 (8) - Take-up belt for models 800, 900, 920 (1/8" x 24") - $10
  • GRAFLEX 16MM PROJECTOR BELT #39211-P2 (7) - Rewind belt for models 800, 900, 920 (1/8" x 13.5") - $10
  • GRAFLEX 16MM PROJECTOR DRIVE BELT #39086 (1) - Flat motor drive belt for the Singer Graflex 16mm sound projector - $29

SUPER-8 SOUND PROJECTOR BELTS
I have refurbished Elmo and Sankyo projectors for more than 20 years and compiled these belt sets from O-rings I discovered work best from trial and error testing. Please note that I can not be responsible if you don't know how to install them. I mean to sell them only to people that know how to install them correctly.

  • ELMO ST-1200D & HD BELT SET - All four square sided belts shown at the right. The two drive pulley belts, the take-up belt and the counter belt - $29
  • ELMO ST-1200 BELT SET (4 drive pulley model only)- Two belts; the drive belt for going over and around 4 pulleys, and the take-up belt - $24
  • ELMO ST-180-E BELT SET - Includes two belts; the drive motor belt and the take-up belt. You may have to re-adjust the running speeds with the two adjustable potentiometers on the circuit boards after installing these belts - $20
  • ELMO ST-600 BELT SET - Includes two belts; the drive motor belt and the take-up belt. You may have to re-adjust the running speeds with the two adjustable potentiometers on the circuit boards after installing these belts - $20
  • ELMO ST-600D BELT SET - Same as above but with a slightly larger take-up belt required for this model and a third counter belt - $24
ElmoBeltSet1200a.jpg (32709 bytes)
  • ELMO ST-800 BELT SET - Includes two belts; the drive motor belt and the take-up belt. You may have to re-adjust the running speeds with the two adjustable potentiometers on the circuit boards after installing these belts - $20
  • SANKYO 502, 702, 700, 800 & B&H DCT, DCM, DCR BELT SET - This is the take-up and drive belt set for ONLY the super-8 sound projector models shown. You may have to tweak the running speeds with the two adjustable potentiometers on the circuit boards after installing these belts - $20
  • SANKYO 600, MINOLTA 6000 & YASHICA BELT SET - This is the take-up and drive belt set for ONLY the Sankyo 600, Minolta 6000 and Yashica P810 and P820 model super-8 sound projectors. You may have to tweak the running speeds with the two adjustable potentiometers on the circuit boards after installing these belts - $20
KodakSound8Pully1.jpg (37531 bytes)

KODAK 8MM SOUND-8 & M100 SUPER-8 SOUND PROJECTOR DRIVE PULLEY

  • DRIVE PULLEY FOR KODAK SOUND-8 AND M100A - This is the heart of the mechanism for the Kodak Sound-8 8mm sound projector and the Kodak M100 and M100A Super-8 sound projector.These are Brand New fresh made pulleys and will make all the difference in the world in the performance of these projectors. Comes with a wrench and 24 fps strobe disc - $149

Eumig807c1.jpg (11381 bytes)

  • EUMIG DRIVE PULLEY FOR MARK-S 8MM MODEL PROJECTORS (2) - This is the main drive assembly for forward and reverse for the Eumig Mark-S 8mm sound and Mark-8 silent projectors. Can also be used with other 700 series models. Totally refurbished with brand new rubber surfacing on the two drive discs, which are the heart of the mechanism. This was achieved by much trial and error (and costly) experimenting to find the exact type and consistancy of rubber required. If you are having a problem with your projector maintaining the speed and going too slow or not going at all, then this will solve your problem and make you projector run like new again - $299
EumigPulley1a.jpg (44620 bytes)
  • Also a Eumig Drive Pulley with the extended shaft for Super and Dual-8 models 701 to 824  - $349  AVALIABLE SOON
    NOTE: The inching knob on the 700 and 800 models is the knob on the extended shaft of the drive disc assembly. It comes out the back of the projector and has the small knob on it you can turn to advance the film manually frame by frame. The one for the Mark-S standard 8 is the same except it doesn't have the extended shaft that comes out the back of the projector, however it would also work on the 700 and 800 models (with the nylon worm gear exchanged).

 

MOVIE  REELS  &  CANS

A number in brackets means I am limited. No number means I have or can get all you want.

400Reg8Reel1.gif (27241 bytes)

  • 8MM 400' (7") PLASTIC REEL IN WHITE BOX - Brand New 400' white reel in a sturdy white 2-piece hinged box - $6
    Reel only - $4

  • 8MM 200' (5") PLASTIC REEL IN WHITE BOX - Brand New 200' white reel in a sturdy white 2-piece hinged box - $4
    Reel only - $2.50

  • SUPER-8 400' (7") PLASTIC REEL IN CAN - Like New 400' blue reel in a matching blue plastic can - $6
    Reel only - $4

400BlueCan1.jpg (52217 bytes)
  • GOLDBERG METAL SUPER-8 200' REEL & CAN SET (6) - Mint 200' (5" diameter) auto-reel and can set in the OB - $10 each

  • 300' METAL 8MM REEL & CAN SET (2 - 8mm and 2 - Super-8) - 300' (6") metal 8mm reel and can set. Ecellent to New used condition - $15 each

  • SUPER-8 GOLDBERG 1200' REEL & CAN SET (2) - Like New black all steel reel and can for super-8 sound projectors with 1200' capacity - $39 each

  • TAYLOREEL SUPER-8 1200' STEEL REEL - High quality, true running, steel 1200' reel for super-8 sound projectors with 1200' capacity - $39

  • BRUMBERGER 8MM STORAGE CHEST, USED (2) - Heavy duty all steel storage chest for twelve 400' metal 8mm reel & can sets. Has side door and ejector lever for each reel. Used in Excellent condition - $24
Posso600Reela1A.jpg (22666 bytes)
  • POSSO SUPER-8 600' (8") REEL AND CASE (12) - High quality, Brand New plastic auto 600' super-8mm film reel in an excellent used Posso or Bonum storage case, ideal for shelf storage. These new reels ship with red spacer pegs. You must remove these red pegs before using the reels - $20 each
    Reel only (5) - $15 each

 

8MM, SUPER-8 AND 16MM LEADER FILM

A number in brackets is the quantity I have. No number means I only have one. Price shown is for one item.

  • 16MM SOUND (SP) PLASTIC WHITE LEADER (10) - Plastic leader film you can use with cement or tape splicers. 100' on a core - $15
  • 16MM SILENT (DP) PLASTIC WHITE LEADER (5) - Same as above but double perforated for silent films. 100' on a core - $15
  • KODAK SUPER-8 MACHINE LEADER (2)- A very dark transparent leader. 200' reel - $25
  • KODAK REGULAR 8MM & SUPER-8 WHITE FILM LEADER - Excellent quality emulsion film white leader you can use with cement or tape splicers. The quantity I have is shown in brackets:
    50'  Super-8 (16) - $12
    200' Super-8 (4) - $39
    50'  8mm (12) - $12
  • 35MM RED MOVIE LEADER - About 500' of 35mm red painted leader - $39
  • 35MM TAN MOVIE LEADER - About 350' of 35mm red painted leader - $29

 

SPLICERS,  SPLICING TAPE,  REWINDS, VIEWERS

See the difference between 8mm and super-8 film.

8mmSuper8flipped1C.jpg (77579 bytes)

Presstapes1.jpg (23308 bytes)

KODAK PRESSTAPE FILM SPLICING TAPE
Pre-perforated tapes work fine on most brands of tape splicers.
ALL NEW FRESH STOCK FROM KODAK

  • KODAK 8MM PRESSTAPES - Package of 40 8mm tapes for making 20 splices - $3.00
  • KODAK SUPER 8MM PRESSTAPES - Package of 40 super-8 tapes for making 20 splices - $3.00
  • KODAK 16MM PRESSTAPES - Package of 40 16mm tapes for making 20 splices - $5
    Sealed box of 20 packages - $79
KodakEdOut1.jpg (53275 bytes)
  • KODAK 8MM/16MM EDITING OUTFIT - For editing, repairing and cleaning your film. High geared hand rewind set for 400' capacity 8mm or 16mm reels. Comes with a presstape splicer for 8mm and 16mm films (not super-8, however the Kodak dual-8/16mm splicer would also snap in the center). Can also be used with super-8 reels if you have a spindle adapter. Comes with one 400' 8mm or 16mm reel and a package of splicing tape of your choice. Excellent in the OB - $169
  • HPI SUPER-8 TAPE BUTT-SPLICER - Excellent heavy duty steel and chrome splicer for splicing super-8 film only using Kodak splicing tape. Near Mint in OB - $49
  • HPI 8mm TAPE BUTT-SPLICER - Excellent heavy duty steel splicer for splicing standard 8mm and 16mm silent film using Kodak splicing tape. Excellent in OB - $49
CraigSplicer1.jpg (12093 bytes)
Griswold35mmSplicer1.jpg (64893 bytes)
  • CRAIG MASTER SIX FILM SPLICER (3) - For cement or tape splicing 8mm, super-8 or 16mm film. All steel construction. Excellent used condition in the worn OB with instructions and a package of Kodak Presstapes in the format of your choice - $79
  • GRISWOLD 35MM CEMENT SPLICER - This is the splicer I used when I collected 35mm films and it makes excellent splices. Comes with many extra scraper blades that can be kept sharp with a file. Excellent - $14
  • ARGUS 8MM SPLICER - This is all steel with a plastic splicing bridge. Comes with one package of 8mm presstapes - $39
  • NEUMADE DYNAMIC 16MM WINDER - Professional super heavy duty 2300' capacity 16mm winder with brake shoe. 4 to 1 winding ratio. Brand New, weighs 11 pounds. I only have the one winder - $129
NeumadeDynamic16mm1.jpg (47220 bytes)

 

FILM CLEANING CLOTH

 

Siliconecloth1.jpg (24089 bytes)
  • FLANNEL SILICONE FILM POLISHING CLOTH (10"x10", Yellow) - Cloth made for cleaning guns is also ideal for polishing and lubricating your 8mm and 16mm films. Safe and ideal for use on magnetic sound tracks. A lubricated sound track will cause less wear on the sound head. Combination of silicone, lubricants and corrosion inhibitors acts like a magnet to dust and leaves a lasting, lustrous finish on the film. If a film cleaner is used, allow it to completely evaporate before polishing with the cloth. 100 square inches - $4.50 TEMPORARILY OUT

 

All films, especially new condition or green prints, need to be lubricated for optimum performance. You can use a product called GOO GONE that is available at Wal-Mart or your grocery store to clean your films using a 100% soft cotton cloth such as an old t-shirt. GOO GONE will clean the film but it does not lubricate it, so after the film cleaner has completely evaporated, it would also be a good idea to polish and lubricate the film with one of the silicone treated cloths listed above.

Up ] 8mm Projectors ] Super-8 Projectors ] 16mm Projectors ] [ Movie Supplies ] Projector Bulbs & Lamps ]

Click HERE to return to my HOME page.


Any item or film title that is in Red Text means that it is on hold, but I haven't yet received the order. This means when I receive the order I will remove the item, or if I do not get the order I will leave it listed and remove the red text.

Go to ORDERING INFORMATION if you are ready to place an order or want to call me or send an Email.

EagleFlag.gif (8887 bytes)

This Site Is Designed And Copyright 1999 - 2008 By Phil Johnson
Do not use images or contents on any other web site or in print.